Appearance                                  White paste     

Solids % ± 2	50
Viscosity (RVT 6/20, 25 °C)	18000 ± 5000 cps
pH	2.5 – 3.5
MFFT (°C)	3
Water resistance class	D3/D4
Storage stability	Protect from freezing

ORGALOK MA 35 can be used in lamination of HPL to wood based substrates and wood to wood when a good water resistance is required.
 
Temperature of substrates, environment & adhesive        15 - 20°C
Moisture content in wood                                               8 - 12 %, if higher increase press time.
Coat weight                                                                   100 - 160 g/m²
Glue line pressure for soft wood or flat lamination          2 - 7 kg/cm²
Glue line pressure for hard wood                                    9 - 12 kg/cm²
Open time > 5 minutes
Closed assembly time up to 15 minutes
Press time (20°C)                                                          10 minutes minimum

ORGALOK MA 35 can be applied using mechanical glue spreader, brush or hand roller and air activated glue gun.
Full water resistance is achieved after 7 days.
Press time in HF may change from 2 to 5 minutes. Press time varies according to the type of wood, moisture of wood, thickness of the material, ambient conditions and machine speed.
The product should be thoroughly mixed before use. Addition of water to ORGALOK MA 35 is not recommended. Clean up with warm water.

To ensure safe storage of this emulsion, containers should be well sealed to prevent the water evaporation and skin forming. The emulsion must be stored between 5 - 25 °C for a maximum of 12 months from production date. Rotate stock using oldest material first. Do not mix with other adhesives. Protect from freezing.