Anti-mould and anti-algae for exterior - Biosistem AM1000X

product_code: 23410090L0006/0.25 л

Description:

Anti-mold additive for exterior, prevents the formation of new molds, algae and fungi, contains no organic substances, easy to use.

 

DESCRIPTION OF THE PRODUCT

BIOSISTEM AM 1000X is additive for exterior paint, with preventive action against the development of moulds and fungi.Recommended as a post-additive in interior painting, particularly in spaces subject to high levels of moisture and poor ventilation. Its action is permanent because the mixture does not wash off the paint film, and boasts excellent resistance to UV rays.

SURFACES FOR APPLICATION

New surfaces or those previously painted with waterborne paints but with evidence of mould Treat the surface with Biosistem Spray. Leave it to be absorbed for 2-3 hours and then
wash with water. If the surfaces are particularly blackened, the treatment can be repeated 3-4 hours after the first. For a better preventive action, treat the surface with Biosistem Titansan; in this case waiat least 24 hours after the application of Biosistem Spray. Apply Biosistem Titansan using only a roller or brush, and leave to act for 24-48 hours, keeping the rooms ventilated. The treatment can be repeated several times to achieve improved penetration into the surface and, therefore, greater effectiveness.Complete the painting cycle with Biosistem Fissativo, if needed, and subsequently with the chosen waterborne paint after adding Biosistem AM1000X as described above.If you add Biosistem AM1000X in the indicated quantities, this does not affect the labelling for hazardous substances of the product it is added to.

DURING TIME 

(at 23 ° C, 50-60% relative humidity): 24 hours.

MIXTURE

Add 250 ml of BIOSISTEM AM1000X (one bottle) to each 14 l container of waterborne paint, proceeding as follows: mix the additive well and pour it all into the paint product before it is diluted, mix vigorously, bearing in mind that the product will act successfully if it is accurately dispersed, wash the can well with some of the water used for dilution then apply the paint following the instructions on the relevant technical data sheet.
For smaller sizes, use 15 ml of additive per litre of paint or 10 ml of additive per kg of paint.

STORAGE

Do not allow to freeze; store at + 5°C to + 20°C. Once opened the undiluted product can be kept for 5 months in the closed container and in the dark.